Using a Pump to Supply A Pressure Washer - Cleaning Equipments

For mobile cleaning applications, pressure washers may be directly fed from a tank without using a pump to push the water from the vessel to the machine.  However, direct drive pressure washers must be kept close to the tank and will be less likely to cavitate if the machine is below the tank level.  Belt drive and gear drive machines are capable of pulling from a tank even more effectively and can be located slightly higher than the water source.  Its always best to locate the pressure washer as close to the water source as possible and lengthen the high pressure hose to reach the cleaning location.

While we have seen a few customers have success using a pump to supply their pressure washer from a tank, it doesn’t happen often and we do not recommend using that type of system.  In many cases, supply pumps have a fluctuation in their flow rate and this makes them prone to cavitating the high pressure pump.  Turbulence in the inlet flow on the pressure washer causes cavitation just like starving the pump or introducing air into the inlet stream.  As a result of this, we neither recommend nor sell equipment for pumping water from a tank to a pressure washer without having an additional reservoir or tank for water right at the machine.

Spring Cleaning

The term “spring cleaning” can be daunting. Remembering all the little items and spaces that need attention can be difficult. Use this outline to help you quickly get through the cleaning tasks you might otherwise avoid during the rest of the year.

Wipe Down the Cabinets and Drawers
Depending on what your cabinets are made of, choose a cleaner that will not damage the surface. (A multi-surface cleaner will likely work on all cabinet surfaces, but check with the manufacturer first, or test the cleaner first in an inconspicuous area.) With a cotton cloth or paper towel, wipe down the fronts and edges of all of your cabinets and drawers to remove the grime and food buildup from dirty fingers and cooking. Then, wipe down all the handles of your cabinets and drawers with a disinfectant cleaner.

Wipe Down Backsplashes
Hopefully your counters are cleaned on a daily basis in the kitchen, but people often neglect cleaning the backsplashes behind counters, which can be susceptible to splashes from mixing bowls and pots and pans on the stove top. Wipe the walls behind the counters with a cloth rag, paper towel or sponge and multipurpose cleaner to remove cooking grime and dirt.

Clean Out the Refrigerator
Use a disinfectant cleaner and and cloth rags or paper towels to wipe out the fridge from back to front. If your fridge shelves and produce bins are removable, take them out and clean them in the sink with dish soap. Make sure you wipe down the inside of the door and the walls, as well as the front of the fridge. Use disinfectant cleaner on the handle.

Clean Appliances
This may include the toaster, microwave, coffee maker, blender or anything else that sits on your counter and is subject to daily use. Wipe evertything down with a cloth and multipurpose or disinfecting cleaning product. Remove the crumb tray from the toaster and empty that, run a pot of white vinegar through your coffee maker to clean the inside out and remove stains, and wipe down the inside of your microwave.

Clean the Oven
If your oven doesn't have a self-cleaning setting (or you just hate the smell of it) use this cleaning technique to remove grease, spills and buildup. Mix 5 tablespoons of baking soda, 5 drops of dish soap and 4 tablespoons of vinegar into a paste and use a sponge to cover the inside of the oven with it. Close the oven door and let it sit for 15 minutes. Then, cover half of a lemon with salt and dish soap, and use that to scrub (and scrub!) the paste into the oven. When all the buildup is disintegrated, wipe away the cleaning solution with a damp cloth or paper towels.

Clean the Dishwasher
Freshen up the dishwasher and remove buildup by placing a glass cup full of vinegar in the top rack and running it through a cycle with the hottest water possible. (Make sure there is nothing else in the dishwasher besides the cup of vinegar.) After the cycle is done, sprinkle a a cup of baking soda around the basin and run it through another cycle with the hottest water possible. This combination of baking soda and vinegar will remove stains and soap buildup.

Sweep and Mop
Sweep and mop the kitchen floor, taking care to get into the corners and underneath cabinet edges that may be neglected during regular cleanings. Pull out the fridge and clean the flooring area where it sets. Yes, this will be a pain, but the combination of collected dust and moisture from the fridge can actually damage your flooring, not to mention cause your refrigerator to run inefficiently.

Bathroom

Clean Around the Base of the Toilet
Wipe down the base of the toilet (where it meets the floor) with a sponge or cloth and disinfectant cleaner. Pay close attention to the sides, front, and area behind the toilet, which can get dusty and are often ignored during routine cleanings.

Wipe Down the Inside of Cabinets
Take all products out of the medicine cabinet, drawers and other storage spaces. Wipe down the surfaces with a damp sponge or cotton cloth and multipurpose cleaner. Put all items back neatly when the areas are dry. Also take this time to toss any expired products and reorganize your space with what's left over.

Living Room

Deep Floor Cleaning
Pull all the furniture that sits on the floor away from the walls. This includes couches, coffee tables and any other furniture you can move. Sweep or vacuum underneath, or mop if you have tile. Put everything back and mop or vacuum one more time. You may want to rent a steamer from a grocery or hardware store to deep clean any carpeted areas.
 
Dust
Use a cotton cloth and a multi-surface spray to wipe down everything in your living room including electronics, knick-knacks, movies, books and shelves. Dust collects over time, especially in corners -- it’s time to get rid of it. Also remember to dust light fixtures, including ceiling fans. Dust collects easily on fan blades, especially over winter when you're less likely to turn the fan on. Dusting them will prevent the dirt from flinging into the air when you do start using it again.

Furniture
Give your couch and arm chairs a good vacuum with the upholstery attachment, removing the cushions to clean underneath them. Spot treat any stains the best you can, taking into account the material of your couch.

Clean Window Treatments
If you have curtains, wash them according to the manufacturer instructions on the tag and hang them when dry to prevent wrinkling.
To clean blinds, fill a bowl with hot water and 1 teaspoon of dish soap. Wipe each blind individually with a microfiber cloth that has been dipped into the cleaning solution. Always wipe blinds with a clean section of cloth so to not leave streaks.

Bedroom

Vacuum or Sweep
Sweep or vacuum as with the living room, moving furniture to clean underneath.

Dust
Wipe down all dressers, nightstands and knick-knacks with a multi-surface spray and cloth.

Clean Your Bed
Remove your mattress, bed skirt and box spring from your bed frame to wipe the frame down with a damp cloth. Also wipe down the wall and floor boards behind your bed. After removing the bedding from the mattress, make a solution of 1 cup baking soda and 4 drops essential oil, such as lavender. Use a kitchen strainer to sprinkle this mixture over the surface of the mattress. Let it sit for an hour and then vacuum up with the upholstery attachment. The baking soda will draw up dirt and deodorize while the essential oil leaves behind a fresh scent.

Miscellaneous Areas

Baseboards
In all rooms and entryways, wipe baseboards with a cotton cloth that has been dipped into a multi-surface cleaner. Pay close attention to corners and high traffic areas that can be easily missed.

Windows
If you don't want to hire a professional window cleaner, this is a task you can accomplish yourself, at least for first story windows. If possible, remove the window pane and screen from the track and hose them down in the yard with a high powered spray. For a thorough cleaning, use dish soap and a sponge, rag or bristle brush for the screen. Let the screen and windows dry thoroughly in the yard before you insert them back into the window track. In the meantime, vacuum the frame out with an attachment and wipe out any visible dirt or grime from the track so the window can slide smoothly.
For windows that aren't removable, a solution of water and white vinegar works as an effective cleaner combined with a clean cloth to wipe it down.

Vents
Take all your vent covers outside and spray them off with the hose on high power. Let them air dry outside before putting them back in the house.

Bottom - Line Burnisher Benefits

Burnishers can enhance a facility’s image with clean and shiny floors. Remarkably, experience indicates that distributors don’t aggressively market burnishers, or other high-end cleaning equipment for that matter.

These days, anything a distributor can do to lower costs - especially labor costs - is of interest to customers. In tight times, distributors can make their mark by informing end users of the increased productivity burnishers offer.

Though burnishers offer some unique benefits, they also create some challenges. The majority of these problems can be resolved with good training and a quality preventive maintenance program. Obviously, there are safety precautions that operators must follow when using any piece of powered equipment.

High shine floor finish: Since burnishers operate at high speeds, the interaction between the burnishing pad and the floor finish creates a high shine, often called the wet look.

Burnishers cover large areas in minimal time: Supermarkets are a good example of how burnishers cover large areas in minimal time. Often, one can visit a supermarket late at night and see dull floors, and only a few hours later, in the morning, the floors are clean and shining.

Saving labor dollars: Since burnishers decrease the amount of time needed to polish floors, there is a significant savings of labor dollars.

Image of the overall facility: When floors are clean with a high shine, the overall facility looks clean. Light also reflects better off a highly polished floor.

Safe floors: Clean and well-maintained floors are safe floors. A good floor cleaning and burnishing program provides a clean, slip-resistant surface for customers to walk on.

Compatibility with floor finishes: There are innumerable floor finishes manufactured today for use with high-speed burnishers. Indeed, many floor finishes are specifically designed to provide a high gloss level that is enhanced by high-speed equipment.

Ergonomics: When operated properly, a burnisher can alleviate some of the stress an operator experiences with slower-speed equipment.

Competitiveness: To stay competitive, end users are looking for every opportunity to produce quality floor finishes at the least possible cost. Burnishers are a great tool to use in controlling operating costs.

Power choices and sizes: Burnishers can be electric, battery-operated or propane-operated. In addition, machines have a variety of burnishing paths, suitable for small to very large areas.

Buying guide for floor cleaning equipment

Some things to consider before buying or hiring floor cleaning equipment:

•  Think about what types of surface (or surfaces) are to be cleaned. If there are different surfaces will a single machine be able to cope?
•  The physical size of the cleaning area determines the size of machine needed. The cleaning width of the floor sweeper or scrubber dyer will give an indication of how much cleaning can be done, and most machines give a floor area performance indication in their technical details to show the area that can be cleaned in an hour.
• The power source is important – mains, rechargeable battery or engine powered. The type of motive power is determined mainly by the physical area being cleaned, for a smaller area a mains powered machine is probably adequate, but the complication of a trailing lead becomes more significant, and potentially hazardous, in larger areas where battery power would be better.
• The type of dirt or debris being removed should also be considered. Light dust or deposits will require a machine of different duty than oily or hard to remove dirt.
• An industrial floor cleaning machine is often used in an environment where it can be subject to knocks and bangs so robustness is important to ensure good service and machine longevity.

There is much to think about before buying floor cleaning equipment and before buying it might be an idea to hire a similar machine to make sure it is the right type for you purposes. Because of the complexity and variety of these machines it is advisable and obvious really, to get advice from a reliable source in order to make an informed decision, as it is a significant financial commitment.

Benefits of Single Disc Scrubber Machines

Single Disc Scrubber Machines are known to provide the best cleaning results compared to any other machine. They are one of the least expensive machines with a wide array of tasks that can be performed with a single machine with just the right change of brush or pad. The single disc scrubber essentially replicates the human action of cleaning, by using a rotating disc, which is in contact with the floor to scrub, buff and polish the area as required. Just that it employs more pressure and speed to clean the floors faster and with greater efficacy compared to manual cleaning. Single disc scrubbers are compact and most easy to be transported via smaller vehicles or public transportation systems to various sites with minimum damages and transport hassles. This makes it a favourite for the in-and-out service job industry people who provide carpet shampooing, marble/ granite polishing, residential spring cleaning services and 1-time cleaning services in offices or small workshops. Single Disc Scrubbers are preferred also because they:

• Reduce recurring labour costs as lesser number of manpower will be required for cleaning a given area
• Reduce training and labour turnover costs
• Improve quality and consistency of cleaning
• Increase productivity and efficiency by speeding up the cleaning process
• Maintain level of hygiene and
• Increase safety standards

Single disc floor scrubber is the single most important machine for the hospitality industry along with the vacuum cleaners. Be it hotels, hospitals, housekeeping service providers or specialized service providers like carpet shampooing and floor polishing, the single disc scrubber has served these segments sincerely and provided its users with generous profits. Every hotel from a 1-star hotel to a 5-star hotel, we can find a single disc scrubber being used, whether it is for marble polishing, carpet shampooing, floor cleaning, wooden floor sanding, buffing etc. Hospitals and laboratories frequently need single disc scrubbers to revitalize the floor polish that has been applied. They can also be used for cleaning under the beds as larger scrubber dryers cannot reach into such compact spaces.

Even in engineering industries where the layer of muck (oil or grease from machines that sticks with dirt to form a sticky layer on the floor) is large enough to make the floors look very dirty with uneven muck deposits, single disc scrubbers can be used with wire brushes and appropriate degreasing chemicals and the original floors can be restored to their earlier glory. This process of cleaning is called scarification.

Even as the market for larger machines is growing at a rapid rate, single disc scrubbers will never fall out of contention and will always be the highest selling floor maintenance machine across the world. Their versatility and ability to perform newer maintenance tasks by using newer accessories always helps in getting new clientele. As the boundaries of service providers are increasingly becoming blurred, an altogether new segment has emerged, of civil contractors who are into floor polishing activities and use the conventional Frankfurt machines. With each passing day, more and more such contractors are impressed by the benefits of using single disc scrubbers combined with diamond polishing pads for floor polishing and have adopted this technology rapidly.

In fact, their demand for heavier range and duty machines in single disc category has lead to the development of larger machines with higher motor powers and heavier weights. Floor polishers across the world now prefer to work with single disc scrubbers.

Variable speed machines instead of single or 2-speed machines are being favoured. The hospitality industry feels that with multiple floor and carpet maintenance operations to be performed, it is ideal to keep one machine with variable speeds instead of different machines with different speeds. Around 10-15 years ago, not many could have envisioned that single disc scrubbers would be used with diamond pads for grinding and honing of stone floors.

See more

Pressure Washing Techniques For a Deep Clean

While the success of many household cleaning tasks simply depends on choosing the right cleanser for the job, there are some cases where the labor involved in removing a film or stain is just too much. Perhaps the stain is bound too tightly to the surface of what you want to clean, or the affected area is simply too large for vigorous hand scrubbing to be a viable option. If this scenario sounds familiar, your solution might require a bit more power.

Common Pressure Washing Situations
You may have seen professionals pressure washing, or maybe even done it yourself. For handling enormous cleaning tasks like buildings, walls, parking areas, heavy equipment, or even statues, a pressure washer is often the right tool for the job. Pressure washing is the preferred cleaning method for removing pollution and fuel emission residue on structures in urban areas. It is also an excellent method of removing mineral, lime, and hard water deposits. Homeowners, especially those who like to work on their own cars, will find that pressure washing is great for grease and oil stains in the garage or driveway; it can even remove graffiti!

DIY vs. Professional Pressure Washing
There is most likely a home improvement center or hardware store in you area that will rent you a pressure washer (or at least point you in the right direction to find someone who will). Make sure that you talk to the people you rent the machine from about the task you plan to use the power washer for to see if they have any advice about technique or particular cleaning solutions you can add to make the operation go smoother.

In professional hands, this is an efficient, effective cleaning alternative that will often save money over more labor-intensive methods. If you've never used a pressure washer before and are unsure of how they work, you may consider hiring a professional for the job. Because of the amount of power involved in pressure washing, an inexperienced user can unintentionally cause a great deal of damage. Situations like cleaning windows or siding with a powerwasher require a delicate and skilled hand, so even if you are confident in cleaning stains from concrete in your driveway, you might consider hiring someone for these kinds of jobs.

Powerwashing Techniques
Power or high-pressure cleaning is a directed blast of internally heated water, often discharged at five gallons per minute, under up to 3,000 pounds per square inch of pressure. For specific cleaning and stain removals, certain chemicals or solvents are added. For specific or environmentally safe cleaning needs, there are several other blasting methods:

With soda blasting, there are the advantages of being environmentally safe, and no pre-masking is required. It cleans multi-layered surfaces, and it is non-corrosive and safe to perform around food equipment.

Sandblasting is intended for jobs that require some stripping and abrasion.

Dry ice blasting shoots dense dry ice pellets that turn to a harmless gaseous substance on impact. This option leaves an instantly dry surface, and it is also safe around food equipment.

The Importance of a Clean Workplace

Keeping a clean workplace is important for many different reasons. Not only will there be hygiene considerations to take into account, but also aesthetic ones and both staff and visitors are going to feel far more comfortable and think far more positively about your company if you ensure that you keep your offices as clean as possible.

Those who don’t employ the skills of office cleaners in London will almost certainly have a workplace that is far less healthy than it should be. An unclean and untidy workplace is a health and safety risk in itself and not only might dirt, bacteria and dust serve to make people ill or exacerbate allergies, leading to reduced efficiency or time off, but a cluttered, untidy and messy work space can also lead to trips, slips and other accidents.

Whether you use a company just to help you have a thorough spring clean once a year or to ensure your workplace is as clean as possible week in and week out, it is important to never underestimate the importance of the right level of cleaning.

Astol Cleantech - P Limited launches a new range of #Lavorwash cleaning equipment's.

Astol Cleantech - P Limited launches a new range of #Lavorwash cleaning equipment's.

Lavorwash S.p.a. is one of the leading manufacturers of high-pressure cleaning systems for indoor and outdoor applications.
Relying on a thirty five-year experience in the cleaning field, lavorwash designs and manufactures professional and domestic machines: high-pressure cleaners, wet&dry vacuum cleaners, floor sweepers, floor scrubber-driers, steam cleaning machines and steam generators.

Today, Lavorwash has grown to establish itself as the leading quality supplier of:

• Industrial sweepers
• Street sweepers
• Scrubbers
• Vacuum-cleaners
• Burnishers
• Waste compactors
• Multi-purpose vehicles