5 Simple Hacks To Keep Your Home Free From Clutter - Spring Cleaning

Keeping the house tidy is very important to maintain the family's health. In addition, living in a clean and orderly home contributes to one's efficiency. If you want to speed up your cleaning skills to save time, read more.

Spring cleaning is typically deemed to be a tiresome job, but there are ways to make your life easier and still keep your house neat and tidy. Here are five spring cleaning hacks that will surely help you perform the job better and faster:

1. Determine what needs to be cleaned. To save you time, you have to target the area of your house that needs to be cleaned. Sweeping in an already clean area will not contribute to keeping your home neat.

According to Astol Cleantech, your cabinets, windows, countertops and floors are among the things that you should clean this spring. Target the high-traffic zone in your home.

2. Use the right tool. Cleaning won't be fast and efficient without the right tool. If you are cleaning the carpet and rugs in your home, Astol Cleantech advises that you use a vacuum, cotton cloths, reliable concentrated cleaner, degreaser and hair dryer.

3. For curtains, revive them by steaming. Most fabrics can be steamed, which ultimately removes bad odors.


The process will not take over 10 minutes. First, close the window and spray the curtain with the Cleaning solution. Run the steamer from top to bottom. Open the window and let the curtains dry.

4. For your deck, skip the manual labor of wiping it by hand. As per Astol Cleantech, you can pressure-wash your deck. Use the one with a tip that produces a spray about the width of two-by-four.
Also, avoid too much pressure, just use medium pressure and keep the spray moving, that is the trick to avoid your deck from damages. Then, apply a wood preservative to prevent discoloration and water damage.

5. Delegate the work. Cleaning the entire house by yourself will surely take time. If you are living with your spouse and children, it won't hurt them if you invite them to join in the task.
Astol Cleantech advice that you share the load. Cleaning is more fun if the family members work together.


How do you clean your house? What are your secrets in cleaning your home efficiently? Share your tips and strategies in the comment section below.

Commercial cleaning guide - Cleaning Machines

THE IMPORTANCE OF A CLEAN OFFICE

One thing is for sure; office cleaning is one of the most important things that you need to think about if you are the person who is in charge at your office. With this being the case, it is vital that you stay on top of all of the things that need to be done. Because of this, you might find that it would help to think about the reasons that office cleaning is so important.

The first reason is the fact that if you ensure that the place is clean and tidy, the people who work in the office are much less likely to catch anything through the germs that are left around. With this being the case, it therefore stands to reason that you would lose many fewer hours due to absences, and this means that you would neither have to put up with a loss in profits, nor would you have to cope with finding a replacement for the staff who are off for a longer period of time.

In addition to this, office cleaning is vital to help to prevent things from going wrong in your office. In such a stressful and fast paced environment, you might find that people don’t pay the amount of attention that they should to what they’re doing, and this could mean that they injure themselves by falling over things that have been left lying around by people who haven’t bothered to do the cleaning up properly. If this happens, then you might even find that you have to spend a lot of money in compensation, which is something that you more than likely can’t afford.

Also, you should find that taking the duties of cleaning away from your staff and hiring an office cleaning company is something that would help a lot. It would allow them to focus on the job that they are hired to do, rather than things that they’re not actually all that keen on, and this means that they will be much better for your company in the long term.

Ultimately, office cleaning should be something that is a priority when you’re running a business, as it means that you are able to keep everywhere clean and tidy, and also that you can increase the chances that you’re going to be able to make a profit which will be more impressive than it might have been in the past.

Why Regular Cleaning is Necessary - Cleaning Machines

Just as the clothes we wear need regular washing to keep them fresh and hygienic, our carpets and upholstered furniture require periodic cleaning. Accumulated soil and grit are major causes of reduced carpet and fabric life, and enable destructive and health harmful mites and bacteria to work unchecked. Cleaning costs are minimal when you consider the replacement cost of carpets and furnishings, so regular cleaning makes economic sense too.

Little do most of us realise that what we are seeing is only a tiny fraction of the soil that a carpet contains. The visible grime we notice is only the tip of the iceberg; up to 85 per cent of the dirt the carpet holds is buried deep within the pile. And when you consider that a carpet can eventually trap its own weight or more in soil - as much as 150 lbs for an average-sized living-room - you'll agree it's no trivial matter.

Regular professional cleaning can ensure:

• Increased life expectancy - Eliminating many of the problems that may lead to carpet and soft furnishings needing to be replaced before their time.
• Stain Removal - No longer worry about concealing those discomforting spots, marks and dried in spillages, professional cleaning can ensure removal of most stubborn stains.
• A more hygienic environment - Complete removal of general dust, soil and accumulated debris.
• Improved appearance - Even the oldest of carpets and furniture can look brand new following professional cleaning.
• Elimination of mites and bacteria - Reducing the risk of allergies, mould and many other potential problems.
• Deodorisation - Most odours can be eliminated by general professional cleaning and NCCA members can offer specialist treatments to ensure a fresh, clean smelling carpet.

Vacuuming Is Not Enough

Regular vacuuming is a necessity to keep your carpets clean and hygienic, and some of you will use other equipment to help maintain and preserve your valuable floor coverings. However, most domestic vacuum cleaners, shampooers and steamers, even the more powerful ones, haven't got what it takes to get rid of that deep-down dirt or nasty germs. This is one of those jobs for the professionals, with their highly sophisticated equipment and the training and experience to know how, when and where to use it.

Tips on selecting a floor cleaning machine - Cleaning equipments, commercial floors, floor cleaning, scrubbing machines

No matter what industry you operate in, it’s absolutely essential to ensure that you own the kind of equipment that’ll guarantee to keep your floors in perfect condition at all times. Not only does dirty flooring lead to an unsightly, unprofessional appearance, it also has the potential to create the kind of unsanitary conditions that can lead to health and safety issues in the future. Keeping your floors looking their very best promotes a proficient, caring company image, and also ensures the safety of everyone operating the working environment.

When it comes to scrubbing commercial floors, selecting the right floor cleaning machine is half the battle. There are so many to choose from that the options can seem overwhelming, so it is worthwhile taking the time to assess your business needs to help you to make an informed choice.

Listed here are a few questions to consider, which will help you to make the right decision and get the best value from the floor cleaning equipment you invest in.

What’s The Job?

This is the first thing you need to ask yourself when it comes to selecting a floor cleaning machine for your company. Take a good look at what kind of job you need to do, and what kind of surface you’re looking to clean.

Any outside jobs can get the best results through use of a scrubber drier, as these machines will enact the kind of strong force required to remove dirt from areas where it accumulates quickly. Floor sweepers can be used for most hard flooring, with alternative brush types available to sweep away different kinds of dirt (for example, finer dirt will require a softer brush for better effects). A buffing machine is ideal for any large spaces, as mopping expansive environments is not only tiring but also hugely time consuming. Pressure washers are also an effective investment for large commercial areas, and for smaller spaces it may be worth looking at purchasing a pedestrian model. Vacuum cleaners are ideal for removing dirt from carpeted floors, and remember to keep in mind that certain models can also double up as hard surface floor cleaners, with the ability to remove any wet patches or stubborn dirt.

How Long Will You Need It?

It’s important to keep in mind how many times you’ll need to use a particular cleaning machine when selecting one for your business. If you’re looking to renovate an industry space as a one-off job, then hiring a powerful cleaning equipment might be your best option. For any floors that require frequent cleaning, it may be better to buy your own equipment so that you have the right machine on hand for any time you need it.

What’s Around You?

It’s also taking account of the environment around you when selecting a particular floor cleaning machine. If you are looking to clean a public place, a smaller machine that generates less noise is the right way to go, whereas if you’re attempting to enhance the appearance of large industrial space, then a large, powerful ride-on machine is best equipped to do the job.

For further advice and support on choosing the very best floor cleaning machine for your industry, contact Astol Cleantech (P) Ltd.

2in1 Floor Mop & Vacuum Cleaner - Cleaning Equipments

2in1 Floor Mop & Vacuum Cleaner

• Save time by vacuuming debris and steaming hard floors at the same time
• Sanitize with steam, using just water to eliminate 99.9% of germs and bacteria*
• Easy to use with Easy Touch Digital Controls, 5-way adjustable handle, and Quick-Release Mop Pad Tray - 4 mop pads included
• Dry Tank Technology keeps your tank dry while you steam
• *When used as directed, results may vary. Tested under controlled lab conditions.

Cleaning without Chemicals - Vacuum Cleaner

Many people are concerned about using chemicals during cleaning as they are perceived to be potentially harmful to the environment and the person using them. No one wants to use chemicals unless they have to, so cleaning methods that reduce or remove the need for them are becoming more popular and dry steam cleaning is one of them.

Using dry steam for industrial cleaning

The efficacy of steam as a cleaning medium has been known for many years and has demonstrable benefits in carrying out industrial cleaning. The basic principle of a dry steam cleaner is that, by putting the water in the boiler under pressure, the boiling point of the water is raised to achieve saturated steam i.e. steam with insignificant water content – usually 5-6%. Steam produced in a pressure washer, for example, has a high water content which may be adequate for some cleaning, but it does not effectively sanitise a surface. Effective sanitation is only achieved where the temperature of the steam is above 140°C when micro-organisms such as bacteria and dust mites will be killed. The high temperature of the steam emulsifies oil and grease as well as destroying germs, which allows the liquefied residue to be removed by vacuum or other means such as a micofibre cloth. A dry steam cleaner can be used on most surfaces except those that are very sensitive to heat. The advantage of this type of cleaner means both a reduction in the use of chemicals and also in water usage, which benefits both the environment and the personnel using it.

Why use a dry steam cleaner

A dry steam cleaner is a versatile cleaning machine that has the advantage of leaving a surface not only looking clean but also being thoroughly sanitised. They can be used in a variety of industrial and commercial settings including hospitals, schools, shopping centres and office buildings. There are also machines designed specifically for chewing gum removal which is a problem for many local authorities and businesses.
Before buying or hiring a steam cleaner there are a few things to consider including:

• The boiler should be made of stainless steel to provide more resistance to lime scale.
• Does the cleaner have continuous water fill?
• The dry steam cleaner should be robustly constructed as it is being used in an industrial environment, with possibly a number of different operators.
• There should be accessories which will enable a thorough cleaning job to be carried out. For example, different brushes and lances suitable for cleaning particular areas.
• Is a vacuum facility required to remove residue?
• Is the machine easily portable?
• What steam pressure is required
• Is a detergent delivery system required
• The surface to be cleaned and sanitised

Using a dry steam cleaner will drastically reduce the need for detergents used in other cleaning methods. It is anticipated that detergent use would be reduced within a range of 80 to 90% and the use of water by up to 95%. Using a dry steam cleaner gives not only environmental advantages but also economic ones as well.
There are many factors to consider before buying or hiring a steam cleaner and before entering into a contract, be sure that the machine will do what you expect it to. If in doubt get expert advice and you can always hire for a period before buying to make sure it does what you want it to. See some examples.

What is a pressure washer? - Vacuum Cleaner

A pressure washer is a mechanical device that uses a pump to generate a high-pressure stream of water to clean surfaces. The pump is typically powered by a gasoline engine, an electric motor, or a diesel engine. The pump is a positive displacement pump that forces a specific amount of water flow from the outlet.  By restricting the flow with the nozzle, much like you do by placing your thumb over the end of a garden hose, the pressure washer produces pressure. Without the nozzle the impact of the water from the end of the pressure washer hose is similar to that from a garden hose. The narrow diameter of the nozzle increases the water's velocity and, consequently, its impact and cleaning power. The smaller the nozzle orifice, the more pressure is potentially produced. However to produce greater pressure, more horsepower is required to force the water through the smaller hole. Each pressure washer calls for a specific size nozzle to match the flow of the pump and the horsepower of the motor. Putting too small a nozzle on your pressure washer strains the components and may cause excessive wear to the machine; too large a nozzle sacrifices cleaning power.

All pressure washers produce pressure and flow. Both are important to the cleaning process. Most pressure washers also provide a method for dispensing soap or detergents, either under low or high pressure. The proper use of soap is often key to the cleaning process. Hot water pressure washer are equipped a burner system to continuously heat the stream of water, further aiding the aiding the cleaning process. Most hot water pressure washer can generate wet steam of approximately 240 degrees F, by turning down the pressure to around 150 PSI. There also true steam cleaners that generate a dry steam of approximately 320 degrees F at 150 PSI. Understanding the basic concepts of pressure flow and cleaning units will help you pick the right pressure washer for the cleaning job at hand.

Pressure and flow
Pressure washers use the impact of the water to break the bond of the dirt to the surface you are trying to clean; the higher the pressure, the greater the impact. The type of nozzle you use makes a huge difference in how much impact your pressure washer creates. A zero degree tip gives you the full impact of your pressure washer but is almost useless for cleaning because it hits such a small area. A 15 degree nozzle increases the area you can clean at one time, but reduces impact by 70%. A 40 degree increases the surface area cleaned further, but has 88% less impact than a zero degree nozzle. This is why a turbo nozzle is so effective; for it is a 0 degree nozzle rotating thousands of times a minute creating a 25 degree cone of full impact.
The amount of water, or flow, a pressure washer puts out makes a big difference in cleaning. The flow is what carries the impact to the surface. The more flow, the more impact; there is a direct relationship. A 13 HP pressure washer putting out 4000 PSI at 3.5 gallons a minutes flow has one third less impact than a 20 HP unit putting out 3,500 PSI at 5.0 gallons per minute. Moreover, flow is what is needed for effective rinsing. This is especially true when cleaning large open surfaces, like driveways; or quickly rinsing vehicles in truck washing operation.

Cleaning units
A pressure washer pump creates a positive water flow, and by restricting that flow at the nozzle creates pressure. The more horse power driving the pump allows more flow to be pushed through the pump and the more pressure to be created at the nozzle. For a given amount of horsepower you can have only so much pressure and flow; there is a tradeoff. Most people focus on pressure (PSI), but you really need to consider both pressure and flow. One way of comparing pressure washers is to use the measure of “cleaning units”. To calculate cleaning units, multiply the pressure times the flow of the pressure washer. All other things being equal (i.e. chemical use and heat) a unit with higher cleaning units will clean better than a unit with lower cleaning units.

Cleaning unit application guidelines
Home use, light duty: 2,000 to 3,750 cleaning units.
Medium duty: 3,800 to 7,500 cleaning units
Heavy duty: 7,600 to 15,000 cleaning units'

The measure of cleaning units is a good way to compare the power of one pressure washer relative to another, with the following proviso. When two pressure washers have different pressure and flow specifications, but the cleaning units are equal, remember the unit with the higher pressure unit will make a rotary nozzle work better, while the higher flow unit will rinse better and make flat tip nozzles work more effectively. With that in mind, the following guide can be used on how much pressure and flow is needed to perform certain tasks. Some of these tasks may require a rotary Dirt Killer nozzle as well if you are using the minimum PSI. The minimum specifications are what are required to get the job done. Having more pressure and flow will make the job go faster. The column marked preferred CU shows how much cleaning power is required to get the job done more quickly. (CU means Cleaning Units: cleaning units = Pounds per Square Inch of pressure (PSI) times Gallons Per Minute of flow (GPM).

How to Maintain the Carpet on Your Staircase

A carpeted staircase adds color, texture, and extra tread for safety on stairs. While you can cover the carpet with plastic runners to protect it from gathering dirt, that is an unsightly solution that should only be temporary. Follow this advice to give the carpet on a high-traffic staircase some special attention to keep it looking new and clean.

Step 1 - Have the Right Vacuum

Just like the carpet in the rest of your home, the carpet on your staircase needs regular vacuuming. It removes dirt, tiny bits of gravel, and debris from the rug that can grind away at it and do damage over time. A standard vacuum cleaner really isn't designed for stairs. It can be heavy to carry and too big for the small steps, making it almost impossible to use properly.

To vacuum the stairs, invest in a lightweight, handheld model that's about the size of a small suitcase. It should include different attachments. You can hold the main unit in one hand and guide the attachment with your other. When vacuuming stairs, always remember to start at the top and work your way down.

Step 2 - Use a Brush Attachment

A hose is good for sucking up surface dirt and may even get some deeper dirt that's loose in the pile. For the best results, use the brush roller attachment, which is similar to the beater brush on your standard vacuum. Doing so loosens impacted dirt and can help your carpet last longer.

Step 3 - Get a Stiff Broom

A stiff broom is also helpful for cleaning your carpeted staircase. It is much more lightweight than any vacuum. Doing so will improve the appearance of the carpet, but vacuuming is still recommended for a deep-down clean. To sweep the carpeted staircase, start at the top and move down. Sweep each step until any debris is on the bottom floor and can be vacuumed or swept away.

Step 4 - Steam Clean

You can steam clean the carpet on your staircase just as you can any carpet. You'll need a steam cleaner with a handheld hose attachment to do this. If you don't want to purchase a steam cleaner, you can probably rent a machine from a local grocery store. Keep in mind that investing in a home steam cleaner will save you money over time.

Step 5- Hand Scrubbing

You can also opt to shampoo the carpet by hand. It is also the best method of spot-cleaning. Some stains, like those with oil bases, may require a pre-treatment solution that loosens the dirt so it can be lifted from the carpet fibers.

Mix specially formulated carpet shampoo with water until you get a light foam. Work it into your carpet with a scrub brush. If you have a Shop-Vac or other wet/dry vacuum, vacuum as much water as you can out of the carpet. Otherwise, use a soft, absorbent towel or cloth to blot the carpet and remove as much water as possible. Once the staircase is completely dry, go over it with a vacuum.

Carpet Cleaning and Commercial Carpet Cleaning Machines

Maintaining the carpet, or other floor covering, in a commercial environment is an important, if sometimes unconsidered, part of any good housekeeping regime. The question is why is it important? And how best to do it?

Carpet in commercial premises represents a significant investment so one major reason for looking after it is to protect that investment, a pretty good reason in itself. One less obvious reason for keeping a carpet well maintained is that it looks better, both from an employee’s and visitor’s point of view. If a carpet is dirty and has the appearance of being uncared for it sends a message to the workforce and others that the company is equally uncaring in other aspects of their business.

So we have established that caring for the carpet is a significant activity, the question then is how is it done?

Getting the basics right

• Starting from first principles, the ease or otherwise of cleaning a commercial carpet depends on the quality of the carpet installed. Selecting the right carpet for a particular application can determine the amount of maintenance required. For instance you wouldn’t put a handmade Turkish carpet in an office environment unless you wanted to replace it on a regular basis.
• The carpet selected should be fit for its purpose – high traffic areas will need one type, perhaps predominately nylon based, whereas in another area, say in a customer facing environment a more luxurious carpet with a wool base may be more appropriate.
• Colour is important as well. As we all know patterned or darker colour carpets show less signs of soiling in between cleaning.

Using carpet cleaning machines

• The most obvious cleaning machine is the vacuum cleaner. The efficient removal of dirt from a carpet is dependent to a large extent on the quality of the vacuum cleaner as well as how it is used. It is important that the dirt is collected in the machine and not allowed to become airborne and settle elsewhere. Particular attention should be given to heavy pedestrian traffic areas as well as the perimeter edges where dirt can build up, if not removed, which can leave dark lines.
• No matter how efficient the vacuuming regime may have been there will be occasions when deeper carpet cleaning is required. This is where a carpet machine to extract the dirt should be employed, which will remove the dirt which has lodged deeper in the pile of the carpet. By introducing chemicals in solution with water and agitating it into the carpet the dirt can be separated from the carpet fibres, which the extractor then removes by means of a vacuum. It is worth bearing in mind that as a carpet extraction machine is not something used every day there is always an option to hire.

Contact for best Carpet cleaning machines Click here

Cleaning commercial wooden floors

The use of wood as a floor covering has grown significantly over the last few years both in the commercial and domestic markets. Whilst using wood is an attractive and decorative material it does present its own problems when it comes to cleaning.

One thing that separates a hardwood floor in a domestic environment from that used in a commercial one is that there is a lot more of it. Most wooden floors have had a seal applied to it to protect against spillages, so regular vacuuming and a wipe over with a well wrung out mop is sufficient to keep the floor clean. In a commercial setting, however, this would be labour and time intensive and this is where floor cleaning machines come in.

To replace the mop the ideal machine is the scrubber dryer which gives the same result as mopping but without the aching back for the person wielding the mop! A scrubber dryer will vacuum, scrub and dry a floor surface in one pass, to reduce cleaning time and minimize any disruption. The machine uses rotating pads to apply cleaning solution and agitate it into the floor surface and the resultant residue is then collected by a system of squeegees and removed into a collection tank. These machines can be used on a variety of different types of floor which makes them an important part of many commercial floor cleaning regimes.

A rotary disc floor buffer is another machine invaluable for ensuring wooden floors are kept to a high standard. This machine uses a single rotating disc which is fitted with a cleaning pad suitable for the appropriate cleaning job. For instance for polishing, a pad with a fine fibre would be used which is specifically designed to achieve a gloss type finish. Other pads can be used with various levels of abrasiveness depending on the depth of cleaning required. Wooden floors are normally sealed to protect the surface from stains and marking but, over time this wears away and needs re-sealing. The old sealant then has to be removed to prepare the surface for a new protective coating and the floor buffer can be used to achieve that. Using a pad of a coarser texture the old seal can be stripped away and the surface made ready for the re-application of the sealant. This type of work is best done by a professional contractor who understands the capacity of the floor buffer and the best type of sealant to apply.

There is a huge variety of different floor coverings available these day and even wood is more complicated than it first appears. For example is the wood solid or a laminate, is it finished or unfinished and to what level can it be abraded if a new coating is required. These types of questions will determine what type of cleaning machine is best suited to the type of floor. Many floor cleaning machines have been developed to be suitable for a variety of floors, so when selecting one it is best to take advice from an expert.

How to Use a Steam Vacuum Cleaner

A steam vacuum cleaner is a very important appliance in a home since its function of extracting steam to kill bacteria while cleaning thoroughly is highly appropriate especially in the case of carpets, floors, soft furnishings and upholstery. The moisture and any residuals and dirt is sucked up by the steam vacuum cleaner.

Step 1 - Read the Instructions Carefully

Although the function of a steam vacuum cleaner is the same for all models, there will obviously be a number of variations from one to another. Hence it is very important to read the instructions accompanying your steam vacuum cleaner carefully and in case you do not fully understand something make sure to ask the supplier or manufacturer. Keep in mind that incorrect use in some way or another may cause the stain you are trying to clean to penetrate further in the fabric, or else you may cause the vacuum cleaner some sort of damage.

Step 2 - Fill with Water and Soap if Desired

A steam vacuum cleaner operates with water. Remove the container where water needs to be placed for the steam cleaner mechanism to operate. Fill this container with water making sure not to exceed the maximum level. Some people also opt to use special soap products made for steam cleaners so as to clean better, remove stains and leave a pleasant fragrance. In such a case make sure to use a good quality product and follow the directions on the package. When ready carefully reinstall the container back in its place inside the steam vacuum cleaner.

Step 3 - Plug the Steam Vacuum Cleaner and Start Cleaning

Plug the steam vacuum cleaner to the nearest or most convenient electrical source and start to rub down on the carpet or other surface with it. It is best to move it in such a way so as to create regular strokes in the same direction, and then alternate the movement. This will ensure more thorough cleaning of the carpet fibers. On the first stroke press the lever or button which will release the steam onto the carpet. When changing the direction release the mechanism which will scrub the carpet and suck the moisture, residuals or dirt.

Step 4 - Repeat the Process

Move little by little, treating small areas at a time until you have cleaned the whole area of the carpet or surface. In areas where there is a persistent stain, you may need to spend more time on this area and go over it more than once so as to scrub more effectively and hopefully manage to remove the stain.

Step 5 - Allow it to Dry Well

Once finished allow the carpet to dry well. It is best to open a window to accelerate the drying process and make sure you avoid walking over the carpet or surface you have just cleaned.

Step 6 - Discard Any Water

Make sure to discard any water or soap that was not used, wipe the container dry and reinstall it in the steam vacuum cleaner.

By following these steps you will deep-clean your carpets or other upholstery effectively.

Cleaning, Sanitation in Food Industries

The primary objective of cleaning in Food Industry is to remove the residue in the machinery on which bacteria grow and to rid all the surface areas including walls of any physical impurities. 

Efficient methods

 The most popular and often used method to remove surface deposits is to clean with a Pressure Washer of about 15 lpm flow & 150 bar pressure. The size and type of pressure washer will be determined by the area and type of machinery being cleaned and the level of cleanliness required. The type would normally be a hot water pressure washer with a steam nozzle option for deeper cleaning like ‘HOT WATER MODEL – 6970’ from Astol Cleantech (P) Ltd.

Alternatively, a standalone Dry Professional Steam Cleaner generating about 9– 2 bar steam pressure might be more appropriate for some applications. This cleaning equipment is available as static or portable unit but the selection of the correct unit is determined by the requirement of the equipment used in the process. A preferred one shall be a Mobile Unit for its convenience to be carried to the point of use – the applications surfaces. Model steam cleaner supplied by Astol Cleantech is ‘GV KATLA.’ 

Customized Cleaning

The processes followed in food industry are normally same every day and therefore, the cleaning requirements are also more or less likely to be similar. The procedure for cleaning food industry machinery is to clean surfaces with the appropriate chemicals followed by rinsing and applying a sanitizing agent to reduce microorganisms to a safe level. To achieve the correct level of hygiene, it is better to install a customised system which allows the process to be carried out to the correct standard. - See more at: Click here

Selecting the right Floor Scrubber

Cleaning floors in theindustrial or commercial environment has to be done regularly because of both hygiene and safety. We have many things to thank gravity for, but as far as any floor is concerned it makes every unwanted speck of dirt or spillage locates itself on top of it. Fortunately cleaning the floor is not as onerous as it used to be thanks to the wide range of industrial cleaning machines now available which saves time and effort (imagine cleaning a floor with a mop and bucket!) One of the most useful machines is the floor scrubber which not only cleans the floor but dries it as well.

How it works

The floor scrubber imitates the action of manual scrubbing by using mechanically driven brushes or pads which rotate to agitate a detergent solution into the floor. The resultant dirty residue is then collected by a system of squeegees at the back of the machine and vacuumed up into a storage tank in the machine for later disposal. This process not only cleans the floor but leaves it dry enough to be used normally after cleaning. Floor scrubbers come in a wide variety of sizes and configurations, from a small push along machine for small areas to a powered ride-on version for cleaning large areas, and there is quite a range of different floor scrubbers in between!

Some things to consider before choosing a floor scrubber to buy or hire

•  What types of surfaces will it be required to clean? Concrete, tiled surfaces, wood or even carpet will need machines with the right attachments.
•  Is the noise level of the machine important? If the cleaning is to be done in working hours or in a public area, the noise level will be a significant factor.
• How tough is the machine? A floor scrubber used in a commercial or industrial environment will typically take a few knocks. Can it stand up to it?
•  Is the machine well designed for operator use? A poorly designed machine can make using it unnecessarily difficult and can lead to operator fatigue which is not only bad for the operator but also interferes with the effective cleaning.
•  Are the controls straightforward to use? Using a floor scrubber should be able to be done by anyone with the minimum of training
• Can spares be readily supplied? All machines with moving parts will need maintenance at some time and things like brushes and pads wear out and need replacing. Check to make sure there won’t be a problem in the future.
• How manoeuvrable is the machine? You want the scrubber to clean all the floor area and that may include some more out of the way areas with limited access, make sure the machine will do what you want it to.

These are some of the criteria to consider before buying or hiring a floor scrubber. 

Know more: click here